15m / Min Cold-Rolled Steel Storage Rack Roll Forming Machine
Brief Introduction of Stroage Rack Roll Forming Machine
1. With the popularization of steel structure, more and more
special-shaped steel has been widely used in various fields and
received more and more attention.
2. After feeding, forming and after forming, the special-shaped
metal plate roller press has smooth and beautiful appearance,
uniform paint pattern, high strength and durability. It is widely
used in industrial and civil buildings, such as workshop,
warehouse, locomotive shed, hangar room, gymnasium, exhibition
hall, theater and other surface walls. Its components include:
machinery, PLC computer control system, hydraulic pump station
system, automatic back shear system equipment. The stroage rack
roll forming machine consists of machine, PLC computer control
system, hydraulic pump station system and automatic cutting system.
Requirements of Rack Shelf Roll Forming Machine
| No. | Item | Specification |
| 1 | Can Formed Material | PPGI,GI,AI |
| 2 | Equipment operation | Automatic |
| 3 | Voltage | 380V 60Hz 3Phase or as your requirement |
| 4 | Thickness of sheet (mm) | 0.3-0.8mm |
| 5 | Material width(mm) | As your requirement |
| 6 | Cover Width of the sheet after formed | as your drawing |
| 7 | The size of the roll forming machine | 6000mmx1600mmx1400mm |
| 8 | Speed | 8-15m/min |
| 9 | Diameter of shaft | 75mm |
| 10 | Weight of the Machine | 3000-3500KGS |
| 11 | Material of rollers | C45 steel quenched and chromed |
| 12 | Motor brand | Siemens or Guomao |
| 13 | PLC | Siemens or Delta or Mitsubushi |
| 14 | Total power (kw) | 9.5kw |
| 15 | Power of hydraulic system | 5.5kw |
| 16 | Power of main molding core | 4kw |
Main Technical Parameters of Shelf Roll Forming Machine
| No. | Item | Description |
| 1 | Rolling speed | 0-15m/min(not include cutting time) |
| 2 | Rolling thickness | 2.5-3mm |
| 4 | Un coiler | 3 TON hydraulic decoiler |
| 5 | The material width | based on profile drawing |
| 6 | Material | GI |
| 7 | Roller stations | 18 stations( base on final design) |
| 8 | Leveling stations | 7 stations |
| 9 | Punching machine | 125T pneumatic punching machine |
| 10 | Roller material | CR12, 58-62,HRC hardness and chrome plated surface |
| 11 | Shaft diameter | 45# forge steel ￠76mm |
| 12 | Maim motor power | 18.5kw |
| 13 | Hydraulic station power | 7.5KW |
| 14 | Hydraulic pressure | 25Mpa |
| 15 | Material of cutting | Cr12 with heat treatment 58-60° |
| 16 | Tolerance | 3m+-1.5mm |
| 17 | Electric source | 380V, 50HZ,3 phase |
| 18 | Way of driving | By gear box |
| Upright Roll Forming Making Machine |
Shelf Roll Forming Machine Woring Process
Decoiler ----- Leveling (Straightening) ----- Roll Forming -----
Punching ----- Cutting ----- Unloading
Or
Decoiler ----- Leveling (Straightening) ----- Punching ----- Roll
Forming ----- Cutting ----- Unloading
Photos of Storage Rack Shelves Roll Forming Machine
