Self Locking Ball Bearing Drawer Slide Rail Roll Forming Machine
Descriptions of Drawer Slide Rail Roll Forming Machine
1. Equipment function: uncoiling, leveling, slitting, punching,
cutting, bending and other multi-functional production line
customization.
2. Boundary dimension: 2800-20000mm long, 800-2000mm wide,
700-1200mm high, according to different functional production
lines.
3. Manufacturing period: 15-70 working days, depending on the
design and manufacturing difficulty of different production lines.
4. Cutting mode: automatic, semi-automatic, hydraulic, pneumatic,
etc., can be customized without waste, non-stop cutting, etc
Main Components of Roll Forming Machine
| 3 tons passive de-coiler | 1 set |
| roll forming machine | 1 set |
| Feeding and leveling device | 1 set |
| Hydraulic cutting device | 1 unit |
| Hydraulic station | 1 unit |
| PLC control box | 1 unit |
| Safety cover | 1 unit |
| Out table | 2 units |
Production Process of Roll Forming Machine
Material Coil – De-coiling – Feeding – Roll Forming – Straightening
– Hydraulic Punching & Cutting-Off – Finished Slide
Technical Parameters of Drawer Slide Rail Roll Forming Machine
| 1. | Power Requirement
| Type | 380v/3ph/50hz | |
| | Main Motor power | 5.5kw | |
| | Cutter power | 4kw+1.5kw | |
| 2. | Forming speed(m/min) | 40-45m/min max | Not include the time of cutting |
| 3. | Forming stations | 12stations | |
| 5. | Material of rollers | CR12 | |
| 6. | Thickness of structure | 30mm | |
| 7 | Forming shaft diameter(mm) | 50 | |
| 8 | Drive | Gear box | |
| 9 | Type of cutting | Hydraulic cutting | |
| 10. | Control system | PLC xinjie | |
| 11. | Install dimension(depend on the final design) | 4.8m×0.6m×1.2m | Without panel length |
| 12. | Total weight (Approx) | 2.3T | Depend on final design |
| 13. | Screen | Text screen /touch screen | |
| NO. | Equipment | Introduction and main technical parameters |
| (1) |
Roll Forming Machine(12groups of wheels)
| Usage: Including de-coiler, forming unit, press unit. For inner and
outer rail |
| 1) Power | 380V, Three-phase, 50Hz |
| 2) Approximate Dimension(mm) | 4400*650*1200 |
| 3)Weight | 3500Kg |
| 4) Production Capacity | 10m/min |
| (2)Roll forming Machine(14groups of wheels) | Usage: Including decoiler, forming unit, press unit. For middle
rail |
| 1) Power | 380V, Three-phase, 50Hz |
| 2) Approximate Dimension(mm) | 4880*650*1200 |
| 3)Weight | 4000Kg |
| 4) Production Capacity | 10m/min |
(3)
| Middle Slide Assembly Machine | Usage: For assembly middle slide and ball cage with ball, assembly
middle plastic |
| 1) Power | 220V,Single-phase, Frequency 50Hz |
| 2) Approximate Dimension(mm) | 2100*1100*1500 |
| 3) Production Capacity | 30pcs/min |
| 4) Weight | 600Kg |
(4) Outer Slide Assembly Machine
| Usage: For assembly middle slide and outer slide with plastic
linear |
| 1) Power | 220V,Single-phase, 50Hz |
| 2) Approximate Dimension(mm) | 2100*1100*1500 |
| 3) Production Capacity | 30pcs/min |
| 4)Weight | 600Kg |
| (5) Riveter | 1) Power | 220V,Single-phase, 50Hz |
| 2) Approximate Dimension(mm) | 950*600*1600 |
| 3) Production Capacity | 60pcs/min |
| 4)Weight | 160Kg |
| (6) Beads Forming Machine | 1) Power | 220V,Single-phase, 50Hz |
| 2) Approximate Dimension(mm) | 950*600*1600 |
| 3) Production Capacity | 40pcs/min |
| 4)Weight | 100Kg |
| 7) Punching & Cutting Mould | Usage: For punching hole and cutting rail of roll forming machine |
| 8) Press Machine 16TON | Usage: For punching stopper mould |
| 1) Power | 380V, Three-phase, 50Hz |
| 2) Approximate Dimension(mm) | 1050*750*1600 |
| 3) Production Capacity | 60pcs/min |
| 4)Weight | 700Kg |
| 9) Press Machine 30TON | Usage: For punching ball cage, continuous press |
| 1) Power | 380V, Three-phase, 50Hz |
| 2) Approximate Dimension(mm) | 1250*900*1900 |
| 3) Production Capacity | 2m/min |
| 4)Weight | 1250Kg |
| 10) Ball Cage Mould | Usage: For punching ball cage, including full automatic puting
material part, feeder, control box and mould |
| Inner Stopper (Lock Mouth Mould) | |
| Outer Stopper (Curved Tail Mould) | |
